Custom Activewear & Sportswear Manufacturer

Home / All / Case Studies / From Tech Pack to Bulk: How a Sportswear Manufacturer Moves an Order

From Tech Pack to Bulk: How a Sportswear Manufacturer Moves an Order

Nov 22,2026

Most brands think sampling is where a sportswear order is won or lost. In practice, the schedule is decided long before the first sample is cut — in how cleanly a tech pack is read, and how tightly each production gate is controlled. This is a transparent look inside an OEM sportswear factory: the eight steps between a tech pack landing in our inbox and sealed bulk leaving for Shenzhen.

 Sportswear production line inside an OEM factory
Sportswear production line inside an OEM factory

1 · Why Sportswear Manufacturers Lose Time Before Sewing Starts

The most expensive delay in custom sportswear rarely happens on the sewing line. It happens in the two weeks before it: a tech pack with conflicting measurements, a fabric substitution nobody signed off, a trim that exists in the design but not in the bill of materials. A supplier who says yes to every ambiguity is not being helpful — they are storing problems for the bulk run.

Our approach is the opposite. Before a single panel is cut, a pattern engineer reconciles the tech pack against a fixed checklist. Anything unresolved gets a written answer, not an assumption.

2 · The Eight Production Gates at Our Factory

Every order passes through the same eight gates. Each has an owner and an exit condition — if the condition is not met, the order does not move forward.

  1. Tech pack intake — measurements, construction, trims and artwork reconciled into one spec.
  2. Pattern making — blocks drafted and graded to the approved size set.
  3. First sample — a wearable sample built from the intended fabric, not a substitute.
  4. Fit & spec review — measurements checked against the tech pack; changes logged in writing.
  5. PP sample / seal — the pre-production golden sample, signed off by both sides.
  6. Cutting — marker efficiency planned; fabric from the same batch and dye lot as approved samples.
  7. Sewing & inline QC — AQL 1.5 inline checks at defined points, not only at the end.
  8. Final inspection & packing — post-wash dimensions verified, then carton marks and packing to spec.
 Pattern and sample development before bulk
Pattern and sample development before bulk

3 · How a Custom Manufacturer Locks Specs Before Bulk

Shrinkage and pilling are the two defects that quietly destroy a sportswear program. Both are decided at the fabric stage, so we test them before cutting: preshrink specs are agreed, wash tests are run, and fibre grades are fixed to the approved swatch. Fabric for bulk comes from the same batch and dye lot as the sealed samples.

Bulk quality is judged on AQL 1.5 (major) plus an eight-step inspection, with post-wash dimensions checked against the sealed card. Final inspection is part of the production window, not an add-on.

4 · What MOQ 300/100 Means for Brand Buyers

Our standard minimum is 300 pieces per style per colour, with trial orders accepted from 100 pieces. That structure keeps dye lots consistent and line changes economical. A "48-hour sample" promise usually means a rushed substitute — we would rather give a realistic 7–10 working day sampling window and hit it.

5 · Capacity and Lead Time: What the Timeline Really Looks Like

Two plants totalling 20,000 m² run BSCI- and GRS-certified lines, with combined capacity of about 500,000 pieces per month. First samples take 7–10 working days and a bulk run of 300–3,000 pieces takes about 25–35 days. Capacity is booked into the schedule up front.

6 · FOB Shenzhen and 50% Deposit: The Terms Up Front

We quote FOB Shenzhen with payment at T/T 50% deposit and 50% before shipment, paid to a traceable corporate account. Our certifications — BSCI, GRS, ISO 9001 and OEKO-TEX — are verifiable, and we would rather state exactly what each covers than imply more.

 Finished activewear ready for quality inspection
Finished activewear ready for quality inspection

Sign Up Out Newletter

Please send your message to us
We focus on providing customized Sports Jacket for brand customers and provide 7-day fast sample service. We not only have advanced hanging production lines to accurately arrange production schedules, but also have complete laminating technology. Contact us now to help you improve the market competitiveness of your products.
*Email
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
Our Eationwear team reads every request and replies promptly. Reach us by email @eationgarment ,WhatsApp or phone — your message is routed to the right specialist.